SLOVENIA

PXA-H800 V1.110 / V2.110 Update

There are 2 different firmware versions. Please check the requirements below, before you start the firmware download process.

1. Firmware Version V1.110

  • When a non-Alpine Ai-NET compatible head unit is used

  • When one of the following Ai-NET compatible products is used: INA-W910R / IVA-W520R / IVA-D511R / IVA-D511RB / IVAW502R / IVA-W505R / IVA-W202R / IVA-W205R / IVA-D105R / IVA-D106R / IVA-D800R / CDA-117Ri / VPA-B211P / VPA-B222R

     

Download PXA–H800 Firmware

FU_PXA-H800_V1110.zip (Version V1.110) - 246MB

(incl. RUX-C800 and Sound Manager for PXA-H800)

2. Firmware Version V2.110

  • When one of the following Ai-NET compatible head units is used: iDA-X301 / iDA-X301RR / iDA-X311 / iDA-X311RR / iDA-X305 / iDA-X305S / CDA-9884R / CDA-9885R / CDA-9886R / CDA-9887R / CDA-105Ri / DVA-9965R / iXA-W407BT / iXA-W404R

 

Download PXA-H800 Firmware
FU_PXA-H800_V2110.zip (Version V2.110) - 246MB

(incl. RUX-C800 and Sound Manager for PXA-H800)

Introduction

This guidebook describes the procedure for updating the PXA-H800 software.

UG_PXAH800_ML.pdf (PDF 2.3 MB; EN, FR, ES, DE, IT, SV)

 

 

Popravki za :

  • Odpravljanje nepotrebnega DSP prizvoka
  • Ohranjevanje Shranjenih Nastavitev Tudi po Odklopu iz Napajanja ali Odklopu iz Ai-NET
  • Izboljšano Delovanje Shranjenih Podatkov (Navi Mix nastavitev (on/off), nivo glasovnega vodenja in Shranjevanje Imprint nastavitev v spominsko zaporedje)
  • Nastavitev nivoja Nizkotonca za starejše Ai-NET enote
  • Višji nivo nizkotonca pri DD ter dts načinu
  • Višji nivo pri Navi-Mix-u
  • Nova Programska Oprema SoundManager
  • 64-bit compatible

Warning

Before proceeding with this update please ensure you have all sound settings saved.

All settings will be lost during this update.


Requirements

  • High Speed Internet connection

Update Instructions (the update procedure is the same for the firmware versions V1.110 / V2.110)

1. Download update file (.zip).

2. Extract downloaded file to your desktop.

3. Install "SoundManagerforPXA-H800Ver1110_setup.exe" OR "SoundManagerforPXA-H800Ver2110_setup.exe" on your computer.

4. Connect the PXA-H800 to your PC and start the Sound Manager Software.

5. Select "Option (O)" and then "PXA-H800 Software Download (M)".

 

6. Select OK.

 

7. Start the "Starting PRESET data backup" by clicking YES.

(All PXA-H800 data and settings will be saved on your PC. With this backup you can restore all data on PXA-H800 after the update.)

 

 

8. Click OK after the backup is completed.

 

9. Select extracted file “PXA-H800_v1110.bin” OR "PXA-H800_v2110.bin" and then click "Open".

 

10. The update will start automatically. This process takes approximately 10 minutes.

 

11. Once the update is completed follow the screen prompts.

 

12. When restarting the Sound Manager Software ensure that the PXA-H800 Version is changed to V1.110 OR V2.110

 

13. Your PXA-H800 update is completed.

14. If you have a RUX-C800, please follow the next steps for updating the RUX-C800 software.

15. Connect the PXA-H800/RUX-C800 to your PC and start the Sound Manager Software.

(If PXA-H800 is already updated with V1.110 OR V2.110 and RUX-C800 is connected, the error message "Version Error" will be displayed on RUX-C800.)

 

16. Select "Option" and then "RUX-C800 Software Download (F)".  

 

17. Select OK.

 

18. Select extracted file “RUX-C800_v1110.bin” OR "RUX-C800_v2110.bin" and then click "Open".

 

19. The update will start automatically. This process takes approximately 10 minutes.

 

20. Once the update is completed follow the screen prompts.

 

21. When restarting the Sound Manager Software ensure that the PXA-H800 and RUX-C800 Version is changed to V1.110 OR V2.110.

 

22. Your update is completed.