SLOVENIA
 Products  Support and others

1. Firmware Update NVE-M300P

RUE-M300 omogoča priklop na NVE-M300P. Tako omogoča priklop na katerikoli Alpine monitor, ki ni podprt z zaslonom na dotik.

Zmožnost delovanja, NVE-M300 potrebuje nadgradnjo programske opreme.

Please check the software release date before updating your unit. This update is only required if the release date is the same, or earlier than indicated in the screenshot.

2.Alpine Map Update

How to get this information

1. Press the "Menu" button

2. Select the field "Settings"

3. Go to "About" and check the software release

Navigation Software Improvements

  • Enables RUE-M300 compatibility
  • Enables application and database update via online server

Requirements

  • High-speed internet connection
  • USB stick (2 GB or more recommended)

Instructions

2. Map Update NVE-M300P

2.1. Map Update Preparation: Text-To-Speech (TTS) Management

Before proceeding with the Map Update itself, the NVE-M300P needs to be prepared.
Download the “NVE-M300P TTS Manager Tool” and extract the file on root directory of an empty USB stick (folder “M3” needs to be in root directory of the USB stick).

Requirements

  • High-speed internet connection
  • USB stick (2 GB or more recommended)

Instructions

  1. Power on NVE-M300P and connect the USB stick with the
    “NVE-M300P TTS Manager Tool”, folder “M3” in root directory of the USB stick.
  1. The “NVE-M300P TTS Manager Tool” starts up.
    All TTS voices marked with (*) are stored on the NVE-M300P unit.
  1. Select a TTS voice of your choice and press “OK”. The selected TTS voice will be available for navigation.
All other TTS voices are transferred from NVE-M300P to USB stick. This process takes up to 15 minutes.
CAUTION: If you consider changing the TTS voice later on, the USB stick must be kept as a backup.
  1. Once the TTS voice preparation is finished remove the USB stick. NVE-M300P will restart automatically.

    All TTS voices, except your selection, are located on “USB stick\\NVE_M300P_Voices” as a backup.

 

 

2.2. Naviextras Toolbox

2.2. Naviextras Toolbox

Alpine.naviextras.com is the official map update portal for Alpine.

 

Some alpine.naviextras.com site features, including buying updates, require that your device is registered. 

 

Please register your NVE-M300P and your required personal data within Naviextras Toolbox, which is a free PC-tool.

 

alpine.naviextras.com

2.3. Alpine Map Update

2.3. Alpine Map Update Process

The navigation map update of your NVE-M300P is done by USB stick. This allows easy transfer of the map update to your installed navigation module NVE-M300P. During the update only revised or new content will be transferred from the USB stick.

Requirements


  • Windows XP (Service Pack 2) or higher

  • USB stick (4 GB or more recommended)

Prepare USB stick


  1. Download <<MU_NVE-M300P_xxxxxxxx.zip>> to your PC.

  2. Connect an empty USB stick to your PC.

  3. Extract the file (i.e. with WinZip/IZArc) onto the USB stick. The folder 
“M3” has to be stored in root directory of the USB stick.

  4. Safely remove the USB stick from your PC.

 

 

Copy Device Information from NVE-M300P to USB stick

Copy Device Information from NVE-M300P to USB stick

1) Power on NVE-M300P by turning on the ignition.

 

2) Connect the USB stick via the USB cable included in the box to NVE-M300P to start the synctool.

 

3) Press the “Collect device information”.

 

5) Press “Quit”.

 

7) Remove the USB stick, then press “Continue”. NVE-M300P restarts

automatically.

 

 

 

 

 

 

4) Press “OK” once Update or Backup successfully completed without errors.

 

6) Press “Yes” to quit synctool.

 

 

Download new or changed content to USB stick

1) Start Naviextras Toolbox and connect the USB stick to your PC. The prepared USB stick will be recognized as navigation device.

2) Purchase and install content and updates as described within Naviextras Toolbox.

3) Safely remove the USB stick from your PC.

 

 

Copy new or changed content to NVE-M300P

Copy new or changed content to NVE-M300P

1) Power on NVE-M300P by turning on the ignition and reconnect the USB

stick via the USB cable included in the box to start the synctool.

2) Press “Copy updates to your device”.

 

4) Press “OK” once Update or Backup successfully completed

without errors.

6) Press “Yes” to quit synctool.

 

 

 

 

3) Press “Yes” to initialize the update.

 

5) Press “Quit”.

 

7) Remove the USB stick, then press “Continue”. NVE-M300P restarts

automatically.

Service Information

The following information is quite important for the service handling if you opened an account at Naviextras.com and purchased additional updates for your NVE-M300P, in addition to the original installed software package!

 

The NVE-M300P creates an individual software identification number called SWID, during first boot up of the system. This software identification number will be transfered to Naviextras.com while you purchase an update for your NVE-M300P. This is made in order to guarantee Copyright protected issues. Your device and your account for this device will be recognized on your next visit at Naviextras.

 

Alpine Service are using PDF fomat for these forms and would firstly like to explain how these forms should be completed, for those of you that do not have acrobat installed on your computers these forms can be completed using Acobat Reader which is available as freeware, here is a link to download Acrobat Reader, Reader 9 or above will be required for these forms: (Adobe Reader X (10.1) will be needed for .pdf with embedded videos)..

http://get.adobe.com/

 

Completed copies of PDF forms can not be saved on your computer for security reasons, so please complete the form and print it as a PDF, if you do not have a PDF printer installed on your computer there are many freeware PDF printers available on the net, here is a link to a well know one:

http://www.bullzip.com/products/pdf/info.php

 

Get the SWID number on your NVE-M300P

The SWID is important for service handling, since you will lose your SWID number if:

  • Your dealer/your service station exchanges your NVE-M300P to another one.
  • The service replaced the Main PWB.
  • Your NVE-M300P needs a complete re-installation of the firmware and software.

Service Form

Therefore please note your SWID and fill out the attached form if your NVE-M300P needs to return  to our service department and you have purchased additional software for this device.

Unnecessary, if your NVE-M300P has still original software package on it.

Service Form (PDF, 0.9 MB)

Please download the file and open in your Browser.